constant current versions - product specifcations model number output current (ma 5%) output voltage range (vdc) max output power (w) typical effciency pled150w-428-c0350 -xx 350 142-428 150 92% pled150w-333-c0450 -xx 450 111-333 150 92% pled150w-283-c0530 -xx 530 95-283 150 91% pled150w-214-c0700 -xx 700 72-214 150 91% pled150w-142-c1050 -xx 1050 48-142 150 91% pled150w-107-c1400 -xx 1400 36-107 150 91% pled150w-085-c1750 -xx 1750 29-85 150 90% pled150w-071-c2100 -xx 2100 24-71 150 90% pled150w-061-c2450 -xx 2450 21-61 150 90% pled150w-053-c2800 -xx 2800 18-53 150 90% pled150w-048-c3150 -xx 3150 16-48 150 89% pled150w-042-c3500 -xx 3500 14-42 150 89% pled150w-035-c4200 -xx 4200 12-35 150 89% pled150w-030-c4900 -xx 4900 10-30 150 88% pled150w-024-c6250 -xx 6250 8-24 150 88% constant voltage versions - product specifcations model number output voltage (vdc 5%) output current range (ma) max output power (w) typical effciency pled150w-024 ? 24 1563-6250 150 88% pled150w-030 30 1225-4900 150 88% pled150w-035 35 1050-4200 150 89% pled150w-042 42 875-3500 150 89% pled150w-048 48 788-3150 150 89% pled150w-053 53 700-2800 150 90% pled150w-061 61 613-2450 150 90% pled150w-071 71 525-2100 150 90% pled150w-085 85 438-1750 150 90% pled150w-107 107 350-1400 150 91% pled150w-142 142 263-1050 150 91% pled150w-214 214 175-700 150 91% pled150w-283 283 133-530 150 91% pled150w-333 333 113-450 150 92% pled150w-428 428 88-350 150 92% -xx indicates dimming options are available. see options at left. blank = fxed current output electrical specifcations input voltage range: 100-277 vac nom. (90-305 v min/max) input over-voltage: can endure 320vac for 48 hrs, 350vac for 2 hrs frequency: 50/60 hz nom. (47-63 hz min/max) power factor: >0.90 @ > 70% load, 120-277v inrush current: <60.0 amps max @ 277vac, cold start, full load input current: 0.75 amps max @ 230vac, 1.41 a max @ 120vac maximum power: 150w current accuracy: 3% load regulation: 4% thd: <_ 20% @ > 70% load, 120-277v ripple & noise: (vpk-pk) 5% vo max @ 20 mhz bw, full load output in parallel with 0.1 f ceramic & 10 f electrolytic ripple: (ipk-pk) 5% io max @ 20 mhz bw, full load output in parallel with 0.1 f ceramic & 10 felectrolytic. 120 hz component (flicker free) start-up time: 150ms typical @ full load, 120vac/60hz (1000ms max) leakage current: 0.68 ma max @ 120vac, 0.75 ma max @ 277vac hold up time: 30ms typical @ full load, 277vac protection: over-voltage, over-current, and short circuit (auto-recovery) environmental specifcations minimum starting temp: -30oc maximum case temp. 90c storage temperature: -40oc to +85oc humidity: 5% to 95% cooling: convection vibration frequency: 5-55 hz/2g, 30 minutes mtbf: 260,000 hours at full load and 40oc ambient conditions per mil-217f notice 2 emc: fcc 47cfr part 15 class b compliant impact resistance: 1g/s weight: 24.4 oz (690 grams) pled150w seriesC fixed output & dimmable flicker-free led drivers constant current & constant voltage with isolation black magic thermal advantage? aluminum housing ? total power: 150 watts ? input voltage: 100-277 vac nom. ? ul dry & damp location rated ? ip66 & nema6 ? ul type hl rated for hazardous locations ? ul sign components manual (s.a.m. models) rev 9-11-15 ordering options: -d: 0-10v & resistance dimmable models dim 100-10%. two extra wires on the output side (+purple/-gray). compatible with most quality 0-10v wall dimmers. see page 3. -d3: 3-wire dimmable models dim 100-10%. three extra wires on the output side (yellow/purple/gray). compatible with potentiometer dimming. see page 3. -pd: pwm dimmable models. two extra wires on the output side(+purple/-gray). dims via positive 10% to 100% duty cycle, 200hz to 1khz, 0-10v pulse. see page 4. e332160 sign components manual ? indicates s.a.m. specifcations subject to change without notice. note: led drivers are designed and intended to operate led loads only. non-led loading may be outside the specifed design limits of our led drivers, and therefore cannot be covered by any warranty. if you desire to use our led drivers to operate non-led loads please contact us to discuss compatibility. thomas research products ? 1225 bowes rd ? elgin, il 60123 ? t 847-515-3057 ? f 847-515-3047 ? www.trpssl.com
pg 2 of 4 dimensions - in [mm] 1.34 [ 34 ] 0.236 [ 6 ] 0.71 [ 18 ] 1.165 [ 29.6 ] 0.236 [ 6 ] 7.20.047 [ 1831.2 ] 7.6 [ 193 ] 6.8 [ 173 ] 2.7 [ 68.6 ] 0.16 [ 4 ] 12.0 min [ 305 min ] 12.0 min [ 305 min ] 2.33 [ 59.2 ] 0.31 [ 8 ] 1.47 [ 37.3 ] 0.390.04 [ 101 ] 0.390.04 [ 101 ] tc = 90c max input black (l) white (n) green/yellow (g) dimming purple (dim+) gray (dim-) ouput red (v+) blue (v-) 2.240.12 [ 57.03 ] 2.240.12 [ 57.03 ] wire specs: input leads: 18 awg, rated 600 v, 105c, min. output leads: 18 awg, rated 300 v, 105c, min. dimming leads: 22 awg, rated 300 v, 105c. all wires are stranded with solder dipped ends. ul conditions of acceptability see website for additional information 40% load pf power factor / load 60% 80% 100% 40% load thd thd / load 60% 80% 100% 1 20v a c 230vac 277vac 1 20v a c 230vac 277vac 0.800 0.825 0.900 0.875 0.850 0.925 0.975 0.950 1.000 0% 15% 10% 5% 25% 20% 30% typical efficiency / load 75% 70% 80% 85% 90% 100% 95% normalized output voltage efficiency 40% 60% 80% 100% 1 20v a c 230vac 2 77v a c safety and emc compliance ul/cul ul8750 & can/csa-22.2 no. 250.13-12, ul1012/csa-c22.2 no.107.1 ce en 61347-1, en61347-2-13 fcc, 47cfr part 15 class b en 55015 limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment. en 61000-3-2 part 3-2: limits for harmonic current emissions class c, >80% rated power en 61000-3-3 part 3-3: limitation of voltage changes, voltage fuctuations and ficker . 50 case hotspot temperature (c) lifetime (khrs) lifetime / case temperature 85% load @ 277vac 55 60 65 70 75 80 85 90 50 case hotspot temperature (c) lifetime (khrs) lifetime / case temperature 90% load @ 277vac 55 60 65 70 75 80 85 90 50 case hotspot temperature (c) lifetime (khrs) lifetime / case temperature full load @ 120vac 55 60 65 70 75 80 85 90 0 80 120 130 100 20 40 60 70 110 90 10 30 50 140 0 80 120 130 100 20 40 60 70 110 90 10 30 50 140 0 80 120 130 100 20 40 60 70 110 90 10 30 50 140 pled150w series note: life calculations are based on reliability with confdence using a 90% confdence level and <5% failure rate. at a confdence level of 90% it is expected that <5% of the parts will fail at the rated life provided. (failure is defned as a driver drifting outside specifcation, rather than fail to operate) thomas research products ? 1225 bowes rd ? elgin, il 60123 ? t 847-515-3057 ? f 847-515-3047 ? www.trpssl.com ssl solutions faster than the speed of light ?
pg 3 of 4 notes: 1. 0-10v dimmable version comes with an extra two wires +purple/-gray on the output side. 2. compatible with most 0-10v wall slide dimmers and direct 0-10v analog signal. recommended dimmer is leviton ip710 or equivalent 3. 0-10v dimmable version is not intended to dim to zero (off). will be iout <10% @ vdim <1.0v 4. 0-10v dimmable version output will be 100% with purple/gray open and minimum with purple/gray shorted. 0v 1v 2v 3v 4v 5v 6v 7v 8v 9v 10v d i mmi n g i n p u t ( v dc) o u t put c u rre n t / 0 - 1 0 v dc d i mmi ng i nput 0 1 0 2 0 3 0 4 0 5 0 6 0 7 0 8 0 9 0 100 outpu t cu rr ent % "-d" and "-d3" options: 0-10vdc and resistance dimming dim (+) purple ip710 wall dimmer pled150w-xxx-cxxxx-d dim (-) gray 3-wire dimming typical circuit pled150w-xxx-cxxxx-d3 20k potentiometer 10v output (yellow) 0-10v input (purple) return (gray) (dimmer must be current-sink type control) typical dimming circuit parameters minimum typical maximum 10v output, yellow wire 9.2v 10.0v 10.8v 10 output source current, yellow wire 0ma 10ma absolute voltage range on 0-10v (+) purple wire -2.0v +15v source current out of 0-10v purple wire 0ma 2ma pled150w series thomas research products ? 1225 bowes rd ? elgin, il 60123 ? t 847-515-3057 ? f 847-515-3047 ? www.trpssl.com ssl solutions faster than the speed of light ?
pg 4 of 4 pwm in pwm positive dimming typical circuit pled150w-xxx-cxxxx-pd pwm (+) purple return (-) gray parameters minimum typical maximum absolute maximum voltage range on pwm input (purple wire) -2.0v 10v +15v input low level voltage range (purple wire) -2.0 0v +5.5v input high level voltage range (purple wire) +9.0 10v +15v current into pwm input (purple wire) 0ma 1.2ma source current out of pwm input (purple wire) 0ma 2ma pwm input signal frequency 500hz 1500hz pwm input signal positive duty cycle 0% 10-90% 100% notes: 1. pwm dimmable version comes with an extra 2 wires +purple/-gray on the output side. 2. below 10% duty cycle proper dimming operation is not assured. unit is not intended to turn off at <10% duty cycle. "-pd" option: pwm dimming 0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% positive duty cycle o u t put c u rre n t / 1.0 khz positive duty cycle 0 1 0 2 0 3 0 4 0 5 0 6 0 7 0 8 0 9 0 100 outpu t cu rr ent % pled150w series thomas research products ? 1225 bowes rd ? elgin, il 60123 ? t 847-515-3057 ? f 847-515-3047 ? www.trpssl.com ssl solutions faster than the speed of light ?
|
